Lunarpages Web Hosting Forum

Author Topic: Formmail!!?  (Read 15270 times)

leighsww

  • Guest
Formmail!!?
« Reply #30 on: November 21, 2003, 04:19:48 AM »
Quote from: Guldstrand
I dont know i dare to try disable my antivirus, because i have just now got a warning about some NetBus trojan horse :shock:


Okay, that's fine. :wink:

You need to check the chmod and that you uploaded it as ASCII.

Also, post the cgi script, so I know you made the changes inside the script correctly.  Maybe, that's the problem.

Offline Guldstrand

  • Galactic Royalty
  • *****
  • Posts: 245
    • EgenSida
Formmail!!?
« Reply #31 on: November 21, 2003, 04:26:23 AM »
I have just now uploaded the script again in ASCII mode and chmod it to 755. But iīm still geting the error.

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, wwwadmin@guldstrands.net and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.


Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.


--------------------------------------------------------------------------------

Apache/1.3.27 Server at webb.guldstrands.net Port 80
::: Guldstrand :::

That i donīt allready know, i really want to learn...

leighsww

  • Guest
Formmail!!?
« Reply #32 on: November 21, 2003, 04:26:29 AM »
Please hurry up and post the script.  I really have to get some sleep.  I can't wait too much longer.  

If we can figure where the problem is in the next few minutes, you're home free and I can go to bed and you can change all your forms to make them work immediately.

Since we know the form works off my server, we're close to figuring out why it's not on working on yours.

If you said you uploaded in ASCII and chmod 755 then it probably means your script has something filled in wrong.

Offline Guldstrand

  • Galactic Royalty
  • *****
  • Posts: 245
    • EgenSida
Here is the code...
« Reply #33 on: November 21, 2003, 04:27:56 AM »
Code: [Select]
#******* start script ********


#!/usr/bin/perl


use Socket;
##################################################################
# (C)1998-9 Bignosebird.com bnbform v3.0
# This software is FREEWARE! Do with it as you wish. It is yours
# to share and enjoy. Modify it, improve it, and have fun with it!
# It is distributed strictly as a learning aid and bignosebird.com
# disclaims all warranties- including but not limited to:
# fitness for a particular purpose, merchantability, loss of
# business, harm to your system, etc... ALWAYS BACK UP YOUR
# SYSTEM BEFORE INSTALLING ANY SCRIPT OR PROGRAM FROM ANY
# SOURCE!
#
# Socket based e-mail for cross platform capability!
#
############## SPECIAL FORM VARIABLES ############################
#required: comma delimited list of required entry fields
#data_order: comma delimited list indicating what fields to actually
# print and in what order.
#outputfile: the name of the file to save the data in if using a file
#emailfile: the name of the file to hold only the sender e-mail address
#ok_url: URL to go to if successful
#not_ok_url: URL to go to if unsuccessful
#submit_to: email address of person to input receive data by mail
#cc_to: email address of Cc Recipient
#submit_by: email address of person completing form
#autorespond: if yes, then send confirmation to submitter
#automessage: text to print for autoconfirmation e-mail
#form_id: name of form for e-mail subject
#countfile: name of file for serial number counter
#okaydomains: prevents calling the script from other sites,
# without restricting e-mail addresses.
# replaces $SECURE_NAME from earlier versions.
# use only lower case letters.
#SMTP_SERVER: the full host name of the server providing e-mail
# gateway service
##################################################################


## MAIN ##########################################################

# uncomment the line below, and change bignosebird to your domain
# name if you wish to make is so the script can only be called
# from your site.

@okaydomains=("http://www.guldstrands.net","http://webb.guldstrands.net");

#SMTP_SERVER: indicates the name of the host acting as the e-mail
# gateway. "localhost" should work on most systems.

#$SMTP_SERVER="localhost";

#OR IF SMTP IS UNAVAILABLE TO YOU, USE SEND_MAIL-
# BUT NOT BOTH!

$SEND_MAIL="/usr/sbin/sendmail -t";

$lockfile="/tmp/bnbform.lck";

&decode_vars;
&valid_page;
if ($fields{'countfile'} ne "")
{ &get_number; }
&valid_data;
&write_data;

if ($fields{'autorespond'} eq "yes")
{ &answer_back; }

if ($fields{'ok_url'} ne "")
{ print "Location: $fields{'ok_url'}\n\n"; exit;}
else { &thank_you; }

##################################################################
sub write_data
{
if ($fields{'submit_by'} ne "")
{
if (&valid_address == 0)
{
&bad_email;
exit;
}
}

if ($fields{'submit_by'} ne "" && $fields{'emailfile'} ne "")
{
open (EMF,">>$fields{'emailfile'}");
print EMF "$fields{'submit_by'}\n";
close (EMF);
}
$the_date=localtime();
if ($fields{'submit_to'} ne "")
{
#$msgtext="";
#$msgtext .= "On $the_date,\n";
#$msgtext .= "The following information was submitted:\n";
#$msgtext .= "Host: $ENV{'REMOTE_ADDR'}\n";
}
if ($fields{'outputfile'} ne "")
{
&get_the_lock;
open(OUT_FILE,">>$fields{'outputfile'}");
}
foreach $to_print (@sortlist)
{
if ($fields{'outputfile'} ne "")
{ print OUT_FILE "$fields{$to_print}\|"; }
if ($fields{'submit_to'} ne "")
{ $msgtext .= "$to_print = $fields{$to_print}\n"; }
}
if ($fields{'outputfile'} ne "")
{
print OUT_FILE "$the_date\|\n";
close(OUT_FILE);
&drop_the_lock;
}
if ($fields{'submit_to'} ne "")
{
$mailresult=&sendmail($fields{submit_by}, $fields{submit_by}, $fields{submit_to}, $SMTP_SERVER, $fields{form_id}, $msgtext);
if ($mailresult ne "1")
{print "Content-type: text/html\n\n";
print "MAIL NOT SENT. SMTP ERROR: $mailcodes{'$mailresult'}\n";
exit
}
}
if ($fields{'cc_to'} ne "")
{
$mailresult=&sendmail($fields{submit_by}, $fields{submit_by}, $fields{cc_to}, $SMTP_SERVER, $fields{form_id}, $msgtext);
}
}

##################################################################
sub decode_vars
{
$i=0;
read(STDIN,$temp,$ENV{'CONTENT_LENGTH'});
@pairs=split(/&/,$temp);
foreach $item(@pairs)
{
($key,$content)=split(/=/,$item,2);
$content=~tr/+/ /;
$content=~s/%(..)/pack("c",hex($1))/ge;
$content=~s/\t/ /g;
$fields{$key}=$content;
if ($key eq "data_order")
{
$content=~s/ //g;
@sortlist=split(/,/,$content);
}
if ($key eq "required")
{
$content=~s/ //g;
@mandatory=split(/,/,$content);
}
}
}

##################################################################
sub valid_data
{
if ($fields{'data_order'} eq "") #make sure we have work to do!
{
print "Content-type: text/html\n\n";
print <<__W1__;

<H1>NO data_order list SPECIFIED!</H1>

__W1__
exit;
}

foreach $to_check (@mandatory) #test all required fields, bail on 1st bad
{
if ($fields{$to_check} eq "")
{
if ($fields{'not_ok_url'} ne "")
{
print "Location: $fields{'not_ok_url'}\n\n";
exit;
}
else
{
&try_again;
}
}
}

}

##################################################################
sub thank_you
{
print "Content-type: text/html\n\n";
print <<__W2__;

<H1>Thank you!</H1>
Your information has been sent and we will be in touch
with you soon.

__W2__
exit;
}

##################################################################
sub try_again
{
print "Content-type: text/html\n\n";
print <<__W3__;

<H1>Missing Data!</H1>
<B>Please press the back button and fill in
all required fields!<P></B>

__W3__
exit;
}

##################################################################
sub answer_back
{

$subject = "Confirmation";
$msgtext="";
if ($fields{'automessage'} ne "")
{
open (AM,"< $fields{'automessage'}");
while (<AM>)
{
chop $_;
$msgtext .= "$_\n";
}
close(AM);
}
else
{
$msgtext =<<__W4__;

Thank you for your submission. I will be
getting in touch with you soon.

__W4__
}
$mailresult=&sendmail($fields{submit_to}, $fields{submit_to}, $fields{submit_by}, $SMTP_SERVER, $subject, $msgtext);
}

##################################################################

sub get_number
{
$newnum=0;
open(COUNTER,"<$fields{'countfile'}");
while(<COUNTER>)
{
$newnum = $_ + 1;
}
close(COUNTER);
open(COUNTER,">$fields{'countfile'}");
print COUNTER "$newnum";
close (COUNTER);
$fields{'counter'}=$newnum
}

##################################################################
sub valid_address
{
$testmail = $fields{'submit_by'};
if ($testmail =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)/ ||
$testmail !~ /^.+\@(\[?)[a-zA-Z0-9\-\.]+\.([a-zA-Z]{2,3}|[0-9]{1,3})(\]?)$/)
{ return 0; }
else { return 1; }
}

##################################################################
sub bad_email
{
print <<__STOP_OF_BADMAIL__;
Content-type: text/html

<FONT SIZE="+1">
<B>
SORRY! Your request could not be processed because of an
improperly formatted e-mail address. Please use your browser's
back button to return to the form entry page.
</B>
</FONT>
__STOP_OF_BADMAIL__
}

sub get_the_lock
{
local ($endtime);
$endtime = 60;
$endtime = time + $endtime;
while (-e $lockfile && time < $endtime)
{
# Do Nothing
}
open(LOCK_FILE, ">$lockfile");
}

sub drop_the_lock
{
close($lockfile);
unlink($lockfile);
}


##################################################################
sub valid_page
{
if (@okaydomains == 0)
{return;}
$DOMAIN_OK=0;
$RF=$ENV{'HTTP_REFERER'};
$RF=~tr/A-Z/a-z/;
foreach $ts (@okaydomains)
{
if ($RF =~ /$ts/)
{ $DOMAIN_OK=1; }
}
if ( $DOMAIN_OK == 0)
{print "Content-type: text/html\n\n Sorry....Cant run from here!";
exit;
}
}


###################################################################
#Sendmail.pm routine below by Milivoj Ivkovic
###################################################################
sub sendmail {

# error codes below for those who bother to check result codes <gr>

# 1 success
# -1 $smtphost unknown
# -2 socket() failed
# -3 connect() failed
# -4 service not available
# -5 unspecified communication error
# -6 local user $to unknown on host $smtp
# -7 transmission of message failed
# -8 argument $to empty
#
# Sample call:
#
# &sendmail($from, $reply, $to, $smtp, $subject, $message );
#
# Note that there are several commands for cleaning up possible bad inputs - if you
# are hard coding things from a library file, so of those are unnecesssary
#

my ($fromaddr, $replyaddr, $to, $smtp, $subject, $message) = @_;

$to =~ s/[ \t]+/, /g; # pack spaces and add comma
$fromaddr =~ s/.*<([^\s]*?)>/$1/; # get from email address
$replyaddr =~ s/.*<([^\s]*?)>/$1/; # get reply email address
$replyaddr =~ s/^([^\s]+).*/$1/; # use first address
$message =~ s/^\./\.\./gm; # handle . as first character
$message =~ s/\r\n/\n/g; # handle line ending
$message =~ s/\n/\r\n/g;
$smtp =~ s/^\s+//g; # remove spaces around $smtp
$smtp =~ s/\s+$//g;

if (!$to)
{
return(-8);
}

if ($SMTP_SERVER ne "")
{
my($proto) = (getprotobyname('tcp'))[2];
my($port) = (getservbyname('smtp', 'tcp'))[2];

my($smtpaddr) = ($smtp =~
/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/)
? pack('C4',$1,$2,$3,$4)
: (gethostbyname($smtp))[4];

if (!defined($smtpaddr))
{
return(-1);
}

if (!socket(MAIL, AF_INET, SOCK_STREAM, $proto))
{
return(-2);
}

if (!connect(MAIL, pack('Sna4x8', AF_INET, $port, $smtpaddr)))
{
return(-3);
}

my($oldfh) = select(MAIL);
$| = 1;
select($oldfh);

$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-4);
}

print MAIL "helo $SMTP_SERVER\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-5);
}

print MAIL "mail from: <$fromaddr>\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-5);
}

foreach (split(/, /, $to))
{
print MAIL "rcpt to: <$_>\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-6);
}
}

print MAIL "data\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close MAIL;
return(-5);
}

}

if ($SEND_MAIL ne "")
{
open (MAIL,"| $SEND_MAIL");
}

print MAIL "To: $to\n";
print MAIL "From: $fromaddr\n";
print MAIL "Reply-to: $replyaddr\n" if $replyaddr;
print MAIL "X-Mailer: Perl Powered Socket Mailer\n";
print MAIL "Subject: $subject\n\n";
print MAIL "$message";
print MAIL "\n.\n";

if ($SMTP_SERVER ne "")
{
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-7);
}

print MAIL "quit\r\n";
$_ = <MAIL>;
}

close(MAIL);
return(1);
}



#******** end script ********
::: Guldstrand :::

That i donīt allready know, i really want to learn...

leighsww

  • Guest
Formmail!!?
« Reply #34 on: November 21, 2003, 04:30:54 AM »
Okay, I think I know what's the problem.

Change this ...

@okaydomains=("http://www.guldstrands.net","http://webb.guldstrands.net");

to this ...

@okaydomains=("http://www.guldstrands.net","http://webb.guldstrands.net","http://guldstrands.net","http://www.webb.guldstrands.net");

You need to have BOTH with www and without for all your domains.

leighsww

  • Guest
Formmail!!?
« Reply #35 on: November 21, 2003, 04:33:12 AM »
I had to make a revision cause I forgot the " on one of the URLs.  Make sure all the quotation marks are preceding and ending each URL (if you "copied" from the post) and not manually made the revision.

Offline Guldstrand

  • Galactic Royalty
  • *****
  • Posts: 245
    • EgenSida
Formmail!!?
« Reply #36 on: November 21, 2003, 04:36:08 AM »
Quote from: leighsww
I had to make a revision cause I forgot the " on one of the URLs.  Make sure all the quotation marks are preceding and ending each URL (if you "copied" from the post) and not manually made the revision.


I have done the changes, @okaydomains=("http://www.guldstrands.net","http://webb.guldstrands.net","http://www.webb.guldstrands.net","http://guldstrands.net");
 
but iīm still geting the error.
::: Guldstrand :::

That i donīt allready know, i really want to learn...

leighsww

  • Guest
Formmail!!?
« Reply #37 on: November 21, 2003, 04:36:08 AM »
Okay, I see the bigger problem.  Remove the #****** start script******* and the #******** end script ******* lines.  Those were to tell you to copy everything in-between.

That first line is what's the problem.

leighsww

  • Guest
Formmail!!?
« Reply #38 on: November 21, 2003, 04:37:58 AM »
This line ...

#!/usr/bin/perl

MUST be the first line of the script.

I think this will do it!

Offline Guldstrand

  • Galactic Royalty
  • *****
  • Posts: 245
    • EgenSida
Formmail!!?
« Reply #39 on: November 21, 2003, 04:40:52 AM »
This is the changed code:

#!/usr/bin/perl


use Socket;
##################################################################
# (C)1998-9 Bignosebird.com bnbform v3.0
# This software is FREEWARE! Do with it as you wish. It is yours
# to share and enjoy. Modify it, improve it, and have fun with it!
# It is distributed strictly as a learning aid and bignosebird.com
# disclaims all warranties- including but not limited to:
# fitness for a particular purpose, merchantability, loss of
# business, harm to your system, etc... ALWAYS BACK UP YOUR
# SYSTEM BEFORE INSTALLING ANY SCRIPT OR PROGRAM FROM ANY
# SOURCE!
#
# Socket based e-mail for cross platform capability!
#
############## SPECIAL FORM VARIABLES ############################
#required: comma delimited list of required entry fields
#data_order: comma delimited list indicating what fields to actually
# print and in what order.
#outputfile: the name of the file to save the data in if using a file
#emailfile: the name of the file to hold only the sender e-mail address
#ok_url: URL to go to if successful
#not_ok_url: URL to go to if unsuccessful
#submit_to: email address of person to input receive data by mail
#cc_to: email address of Cc Recipient
#submit_by: email address of person completing form
#autorespond: if yes, then send confirmation to submitter
#automessage: text to print for autoconfirmation e-mail
#form_id: name of form for e-mail subject
#countfile: name of file for serial number counter
#okaydomains: prevents calling the script from other sites,
# without restricting e-mail addresses.
# replaces $SECURE_NAME from earlier versions.
# use only lower case letters.
#SMTP_SERVER: the full host name of the server providing e-mail
# gateway service
##################################################################


## MAIN ##########################################################

# uncomment the line below, and change bignosebird to your domain
# name if you wish to make is so the script can only be called
# from your site.

@okaydomains=("http://www.guldstrands.net","http://webb.guldstrands.net","http://www.webb.guldstrands.net","http://guldstrands.net");

#SMTP_SERVER: indicates the name of the host acting as the e-mail
# gateway. "localhost" should work on most systems.

#$SMTP_SERVER="localhost";

#OR IF SMTP IS UNAVAILABLE TO YOU, USE SEND_MAIL-
# BUT NOT BOTH!

$SEND_MAIL="/usr/sbin/sendmail -t";

$lockfile="/tmp/bnbform.lck";

&decode_vars;
&valid_page;
if ($fields{'countfile'} ne "")
{ &get_number; }
&valid_data;
&write_data;

if ($fields{'autorespond'} eq "yes")
{ &answer_back; }

if ($fields{'ok_url'} ne "")
{ print "Location: $fields{'ok_url'}\n\n"; exit;}
else { &thank_you; }

##################################################################
sub write_data
{
if ($fields{'submit_by'} ne "")
{
if (&valid_address == 0)
{
&bad_email;
exit;
}
}

if ($fields{'submit_by'} ne "" && $fields{'emailfile'} ne "")
{
open (EMF,">>$fields{'emailfile'}");
print EMF "$fields{'submit_by'}\n";
close (EMF);
}
$the_date=localtime();
if ($fields{'submit_to'} ne "")
{
#$msgtext="";
#$msgtext .= "On $the_date,\n";
#$msgtext .= "The following information was submitted:\n";
#$msgtext .= "Host: $ENV{'REMOTE_ADDR'}\n";
}
if ($fields{'outputfile'} ne "")
{
&get_the_lock;
open(OUT_FILE,">>$fields{'outputfile'}");
}
foreach $to_print (@sortlist)
{
if ($fields{'outputfile'} ne "")
{ print OUT_FILE "$fields{$to_print}\|"; }
if ($fields{'submit_to'} ne "")
{ $msgtext .= "$to_print = $fields{$to_print}\n"; }
}
if ($fields{'outputfile'} ne "")
{
print OUT_FILE "$the_date\|\n";
close(OUT_FILE);
&drop_the_lock;
}
if ($fields{'submit_to'} ne "")
{
$mailresult=&sendmail($fields{submit_by}, $fields{submit_by}, $fields{submit_to}, $SMTP_SERVER, $fields{form_id}, $msgtext);
if ($mailresult ne "1")
{print "Content-type: text/html\n\n";
print "MAIL NOT SENT. SMTP ERROR: $mailcodes{'$mailresult'}\n";
exit
}
}
if ($fields{'cc_to'} ne "")
{
$mailresult=&sendmail($fields{submit_by}, $fields{submit_by}, $fields{cc_to}, $SMTP_SERVER, $fields{form_id}, $msgtext);
}
}

##################################################################
sub decode_vars
{
$i=0;
read(STDIN,$temp,$ENV{'CONTENT_LENGTH'});
@pairs=split(/&/,$temp);
foreach $item(@pairs)
{
($key,$content)=split(/=/,$item,2);
$content=~tr/+/ /;
$content=~s/%(..)/pack("c",hex($1))/ge;
$content=~s/\t/ /g;
$fields{$key}=$content;
if ($key eq "data_order")
{
$content=~s/ //g;
@sortlist=split(/,/,$content);
}
if ($key eq "required")
{
$content=~s/ //g;
@mandatory=split(/,/,$content);
}
}
}

##################################################################
sub valid_data
{
if ($fields{'data_order'} eq "") #make sure we have work to do!
{
print "Content-type: text/html\n\n";
print <<__W1__;

<H1>NO data_order list SPECIFIED!</H1>

__W1__
exit;
}

foreach $to_check (@mandatory) #test all required fields, bail on 1st bad
{
if ($fields{$to_check} eq "")
{
if ($fields{'not_ok_url'} ne "")
{
print "Location: $fields{'not_ok_url'}\n\n";
exit;
}
else
{
&try_again;
}
}
}

}

##################################################################
sub thank_you
{
print "Content-type: text/html\n\n";
print <<__W2__;

<H1>Thank you!</H1>
Your information has been sent and we will be in touch
with you soon.

__W2__
exit;
}

##################################################################
sub try_again
{
print "Content-type: text/html\n\n";
print <<__W3__;

<H1>Missing Data!</H1>
<B>Please press the back button and fill in
all required fields!<P></B>

__W3__
exit;
}

##################################################################
sub answer_back
{

$subject = "Confirmation";
$msgtext="";
if ($fields{'automessage'} ne "")
{
open (AM,"< $fields{'automessage'}");
while (<AM>)
{
chop $_;
$msgtext .= "$_\n";
}
close(AM);
}
else
{
$msgtext =<<__W4__;

Thank you for your submission. I will be
getting in touch with you soon.

__W4__
}
$mailresult=&sendmail($fields{submit_to}, $fields{submit_to}, $fields{submit_by}, $SMTP_SERVER, $subject, $msgtext);
}

##################################################################

sub get_number
{
$newnum=0;
open(COUNTER,"<$fields{'countfile'}");
while(<COUNTER>)
{
$newnum = $_ + 1;
}
close(COUNTER);
open(COUNTER,">$fields{'countfile'}");
print COUNTER "$newnum";
close (COUNTER);
$fields{'counter'}=$newnum
}

##################################################################
sub valid_address
{
$testmail = $fields{'submit_by'};
if ($testmail =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)/ ||
$testmail !~ /^.+\@(\[?)[a-zA-Z0-9\-\.]+\.([a-zA-Z]{2,3}|[0-9]{1,3})(\]?)$/)
{ return 0; }
else { return 1; }
}

##################################################################
sub bad_email
{
print <<__STOP_OF_BADMAIL__;
Content-type: text/html

<FONT SIZE="+1">
<B>
SORRY! Your request could not be processed because of an
improperly formatted e-mail address. Please use your browser's
back button to return to the form entry page.
</B>
</FONT>
__STOP_OF_BADMAIL__
}

sub get_the_lock
{
local ($endtime);
$endtime = 60;
$endtime = time + $endtime;
while (-e $lockfile && time < $endtime)
{
# Do Nothing
}
open(LOCK_FILE, ">$lockfile");
}

sub drop_the_lock
{
close($lockfile);
unlink($lockfile);
}


##################################################################
sub valid_page
{
if (@okaydomains == 0)
{return;}
$DOMAIN_OK=0;
$RF=$ENV{'HTTP_REFERER'};
$RF=~tr/A-Z/a-z/;
foreach $ts (@okaydomains)
{
if ($RF =~ /$ts/)
{ $DOMAIN_OK=1; }
}
if ( $DOMAIN_OK == 0)
{print "Content-type: text/html\n\n Sorry....Cant run from here!";
exit;
}
}


###################################################################
#Sendmail.pm routine below by Milivoj Ivkovic
###################################################################
sub sendmail {

# error codes below for those who bother to check result codes <gr>

# 1 success
# -1 $smtphost unknown
# -2 socket() failed
# -3 connect() failed
# -4 service not available
# -5 unspecified communication error
# -6 local user $to unknown on host $smtp
# -7 transmission of message failed
# -8 argument $to empty
#
# Sample call:
#
# &sendmail($from, $reply, $to, $smtp, $subject, $message );
#
# Note that there are several commands for cleaning up possible bad inputs - if you
# are hard coding things from a library file, so of those are unnecesssary
#

my ($fromaddr, $replyaddr, $to, $smtp, $subject, $message) = @_;

$to =~ s/[ \t]+/, /g; # pack spaces and add comma
$fromaddr =~ s/.*<([^\s]*?)>/$1/; # get from email address
$replyaddr =~ s/.*<([^\s]*?)>/$1/; # get reply email address
$replyaddr =~ s/^([^\s]+).*/$1/; # use first address
$message =~ s/^\./\.\./gm; # handle . as first character
$message =~ s/\r\n/\n/g; # handle line ending
$message =~ s/\n/\r\n/g;
$smtp =~ s/^\s+//g; # remove spaces around $smtp
$smtp =~ s/\s+$//g;

if (!$to)
{
return(-8);
}

if ($SMTP_SERVER ne "")
{
my($proto) = (getprotobyname('tcp'))[2];
my($port) = (getservbyname('smtp', 'tcp'))[2];

my($smtpaddr) = ($smtp =~
/^(\d{1,3})\.(\d{1,3})\.(\d{1,3})\.(\d{1,3})$/)
? pack('C4',$1,$2,$3,$4)
: (gethostbyname($smtp))[4];

if (!defined($smtpaddr))
{
return(-1);
}

if (!socket(MAIL, AF_INET, SOCK_STREAM, $proto))
{
return(-2);
}

if (!connect(MAIL, pack('Sna4x8', AF_INET, $port, $smtpaddr)))
{
return(-3);
}

my($oldfh) = select(MAIL);
$| = 1;
select($oldfh);

$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-4);
}

print MAIL "helo $SMTP_SERVER\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-5);
}

print MAIL "mail from: <$fromaddr>\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-5);
}

foreach (split(/, /, $to))
{
print MAIL "rcpt to: <$_>\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-6);
}
}

print MAIL "data\r\n";
$_ = <MAIL>;
if (/^[45]/)
{
close MAIL;
return(-5);
}

}

if ($SEND_MAIL ne "")
{
open (MAIL,"| $SEND_MAIL");
}

print MAIL "To: $to\n";
print MAIL "From: $fromaddr\n";
print MAIL "Reply-to: $replyaddr\n" if $replyaddr;
print MAIL "X-Mailer: Perl Powered Socket Mailer\n";
print MAIL "Subject: $subject\n\n";
print MAIL "$message";
print MAIL "\n.\n";

if ($SMTP_SERVER ne "")
{
$_ = <MAIL>;
if (/^[45]/)
{
close(MAIL);
return(-7);
}

print MAIL "quit\r\n";
$_ = <MAIL>;
}

close(MAIL);
return(1);
}
::: Guldstrand :::

That i donīt allready know, i really want to learn...

Offline Guldstrand

  • Galactic Royalty
  • *****
  • Posts: 245
    • EgenSida
Formmail!!?
« Reply #40 on: November 21, 2003, 04:42:58 AM »
Please help me to change the script, and then you can email the file. I have to go know, but iīm going to check my mail in 10 minutes.

Thanks for all you wonderfull help.  :D  Bye...
::: Guldstrand :::

That i donīt allready know, i really want to learn...

Offline Guldstrand

  • Galactic Royalty
  • *****
  • Posts: 245
    • EgenSida
Formmail!!?
« Reply #41 on: November 21, 2003, 09:26:49 AM »
I have downloaded a cgi-script from Matt's Script Archive, but i canīt get it to work.   :?

I came to the thank you page, but i havenīt recieved any mails yet from my forms.  :shock:
Can someone please check the code and help me!?  :oops:

Code: [Select]
#!/usr/bin/perl
##############################################################################
# FormMail                        Version 1.92                               #
# Copyright 1995-2002 Matt Wright mattw@scriptarchive.com                    #
# Created 06/09/95                Last Modified 04/21/02                     #
# Matt's Script Archive, Inc.:    http://www.scriptarchive.com/              #
##############################################################################
# COPYRIGHT NOTICE                                                           #
# Copyright 1995-2002 Matthew M. Wright  All Rights Reserved.                #
#                                                                            #
# FormMail may be used and modified free of charge by anyone so long as this #
# copyright notice and the comments above remain intact.  By using this      #
# code you agree to indemnify Matthew M. Wright from any liability that      #
# might arise from its use.                                                  #
#                                                                            #
# Selling the code for this program without prior written consent is         #
# expressly forbidden.  In other words, please ask first before you try and  #
# make money off of my program.                                              #
#                                                                            #
# Obtain permission before redistributing this software over the Internet or #
# in any other medium. In all cases copyright and header must remain intact. #
##############################################################################
# ACCESS CONTROL FIX: Peter D. Thompson Yezek                                #
#                     http://www.securityfocus.com/archive/1/62033           #
##############################################################################
# Define Variables                                                           #
#      Detailed Information Found In README File.                            #

# $mailprog defines the location of your sendmail program on your unix       #
# system. The flags -i and -t should be passed to sendmail in order to       #
# have it ignore single dots on a line and to read message for recipients    #

$mailprog = '/usr/lib/sendmail -i -t';

# @referers allows forms to be located only on servers which are defined     #
# in this field.  This security fix from the last version which allowed      #
# anyone on any server to use your FormMail script on their web site.        #

@referers = ('webb.guldstrands.net','guldstrands.net');

# @recipients defines the e-mail addresses or domain names that e-mail can   #
# be sent to.  This must be filled in correctly to prevent SPAM and allow    #
# valid addresses to receive e-mail.  Read the documentation to find out how #
# this variable works!!!  It is EXTREMELY IMPORTANT.                         #
@recipients = &fill_recipients(@referers);

# ACCESS CONTROL FIX: Peter D. Thompson Yezek                                #
# @valid_ENV allows the sysadmin to define what environment variables can    #
# be reported via the env_report directive.  This was implemented to fix     #
# the problem reported at http://www.securityfocus.com/bid/1187              #

@valid_ENV = ('REMOTE_HOST','REMOTE_ADDR','REMOTE_USER','HTTP_USER_AGENT');

# Done                                                                       #
##############################################################################

# Check Referring URL
&check_url;

# Retrieve Date
&get_date;

# Parse Form Contents
&parse_form;

# Check Required Fields
&check_required;

# Send E-Mail
&send_mail;

# Return HTML Page or Redirect User
&return_html;

# NOTE rev1.91: This function is no longer intended to stop abuse, that      #
#    functionality is now embedded in the checks made on @recipients and the #
#    recipient form field.                                                   #

sub check_url {

    # Localize the check_referer flag which determines if user is valid.     #
    local($check_referer) = 0;

    # If a referring URL was specified, for each valid referer, make sure    #
    # that a valid referring URL was passed to FormMail.                     #

    if ($ENV{'HTTP_REFERER'}) {
        foreach $referer (@referers) {
            if ($ENV{'HTTP_REFERER'} =~ m|https?://([^/]*)$referer|i) {
                $check_referer = 1;
                last;
            }
        }
    }
    else {
        $check_referer = 1;
    }

    # If the HTTP_REFERER was invalid, send back an error.                   #
    if ($check_referer != 1) { &error('bad_referer') }
}

sub get_date {

    # Define arrays for the day of the week and month of the year.           #
    @days   = ('Sunday','Monday','Tuesday','Wednesday',
               'Thursday','Friday','Saturday');
    @months = ('January','February','March','April','May','June','July',
               'August','September','October','November','December');

    # Get the current time and format the hour, minutes and seconds.  Add    #
    # 1900 to the year to get the full 4 digit year.                         #
    ($sec,$min,$hour,$mday,$mon,$year,$wday) = (localtime(time))[0,1,2,3,4,5,6];
    $time = sprintf("%02d:%02d:%02d",$hour,$min,$sec);
    $year += 1900;

    # Format the date.                                                       #
    $date = "$days[$wday], $months[$mon] $mday, $year at $time";

}

sub parse_form {

    # Define the configuration associative array.                            #
    %Config = ('recipient','',          'subject','',
               'email','',              'realname','',
               'redirect','',           'bgcolor','',
               'background','',         'link_color','',
               'vlink_color','',        'text_color','',
               'alink_color','',        'title','',
               'sort','',               'print_config','',
               'required','',           'env_report','',
               'return_link_title','',  'return_link_url','',
               'print_blank_fields','', 'missing_fields_redirect','');

    # Determine the form's REQUEST_METHOD (GET or POST) and split the form   #
    # fields up into their name-value pairs.  If the REQUEST_METHOD was      #
    # not GET or POST, send an error.                                        #
    if ($ENV{'REQUEST_METHOD'} eq 'GET') {
        # Split the name-value pairs
        @pairs = split(/&/, $ENV{'QUERY_STRING'});
    }
    elsif ($ENV{'REQUEST_METHOD'} eq 'POST') {
        # Get the input
        read(STDIN, $buffer, $ENV{'CONTENT_LENGTH'});
 
        # Split the name-value pairs
        @pairs = split(/&/, $buffer);
    }
    else {
        &error('request_method');
    }

    # For each name-value pair:                                              #
    foreach $pair (@pairs) {

        # Split the pair up into individual variables.                       #
        local($name, $value) = split(/=/, $pair);
 
        # Decode the form encoding on the name and value variables.          #
        # v1.92: remove null bytes                                           #
        $name =~ tr/+/ /;
        $name =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg;
        $name =~ tr/\0//d;

        $value =~ tr/+/ /;
        $value =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg;
        $value =~ tr/\0//d;

        # If the field name has been specified in the %Config array, it will #
        # return a 1 for defined($Config{$name}}) and we should associate    #
        # this value with the appropriate configuration variable.  If this   #
        # is not a configuration form field, put it into the associative     #
        # array %Form, appending the value with a ', ' if there is already a #
        # value present.  We also save the order of the form fields in the   #
        # @Field_Order array so we can use this order for the generic sort.  #
        if (defined($Config{$name})) {
            $Config{$name} = $value;
        }
        else {
            if ($Form{$name} ne '') {
                $Form{$name} = "$Form{$name}, $value";
            }
            else {
                push(@Field_Order,$name);
                $Form{$name} = $value;
            }
        }
    }

    # The next six lines remove any extra spaces or new lines from the       #
    # configuration variables, which may have been caused if your editor     #
    # wraps lines after a certain length or if you used spaces between field #
    # names or environment variables.                                        #
    $Config{'required'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g;
    $Config{'required'} =~ s/(\s+)?\n+(\s+)?//g;
    $Config{'env_report'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g;
    $Config{'env_report'} =~ s/(\s+)?\n+(\s+)?//g;
    $Config{'print_config'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g;
    $Config{'print_config'} =~ s/(\s+)?\n+(\s+)?//g;

    # Split the configuration variables into individual field names.         #
    @Required = split(/,/,$Config{'required'});
    @Env_Report = split(/,/,$Config{'env_report'});
    @Print_Config = split(/,/,$Config{'print_config'});

    # ACCESS CONTROL FIX: Only allow ENV variables in @valid_ENV in          #
    # @Env_Report for security reasons.                                      #
    foreach $env_item (@Env_Report) {
        foreach $valid_item (@valid_ENV) {
            if ( $env_item eq $valid_item ) { push(@temp_array, $env_item) }
        }
    }
    @Env_Report = @temp_array;
}

sub check_required {

    # Localize the variables used in this subroutine.                        #
    local($require, @error);

    # The following insures that there were no newlines in any fields which  #
    # will be used in the header.                                            #
    if ($Config{'subject'} =~ /(\n|\r)/m || $Config{'email'} =~ /(\n|\r)/m ||
        $Config{'realname'} =~ /(\n|\r)/m || $Config{'recipient'} =~ /(\n|\r)/m) {
        &error('invalid_headers');
    }

    if (!$Config{'recipient'}) {
        if (!defined(%Form)) { &error('bad_referer') }
        else                 { &error('no_recipient') }
    }
    else {
        # This block of code requires that the recipient address end with    #
        # a valid domain or e-mail address as defined in @recipients.        #
        $valid_recipient = 0;
        foreach $send_to (split(/,/,$Config{'recipient'})) {
            foreach $recipient (@recipients) {
                if ($send_to =~ /$recipient$/i) {
                    push(@send_to,$send_to); last;
                }
            }
        }
        if ($#send_to < 0) { &error('no_recipient') }
        $Config{'recipient'} = join(',',@send_to);
    }

    # For each require field defined in the form:                            #
    foreach $require (@Required) {

        # If the required field is the email field, the syntax of the email  #
        # address if checked to make sure it passes a valid syntax.          #
        if ($require eq 'email' && !&check_email($Config{$require})) {
            push(@error,$require);
        }

        # Otherwise, if the required field is a configuration field and it   #
        # has no value or has been filled in with a space, send an error.    #
        elsif (defined($Config{$require})) {
            if ($Config{$require} eq '') { push(@error,$require); }
        }

        # If it is a regular form field which has not been filled in or      #
        # filled in with a space, flag it as an error field.                 #
        elsif (!defined($Form{$require}) || $Form{$require} eq '') {
            push(@error,$require);
        }
    }

    # If any error fields have been found, send error message to the user.   #
    if (@error) { &error('missing_fields', @error) }
}

sub return_html {
    # Local variables used in this subroutine initialized.                   #
    local($key,$sort_order,$sorted_field);

    # Now that we have finished using form values for any e-mail related     #
    # reasons, we will convert all of the form fields and config values      #
    # to remove any cross-site scripting security holes.                     #
    local($field);
    foreach $field (keys %Config) {
        $safeConfig{$field} = &clean_html($Config{$field});
    }

    foreach $field (keys %Form) {
        $Form{$field} = &clean_html($Form{$field});
    }


    # If redirect option is used, print the redirectional location header.   #
    if ($Config{'redirect'}) {
        print "Location: $safeConfig{'redirect'}\n\n";
    }

    # Otherwise, begin printing the response page.                           #
    else {

        # Print HTTP header and opening HTML tags.                           #
        print "Content-type: text/html\n\n";
        print "<html>\n <head>\n";

        # Print out title of page                                            #
        if ($Config{'title'}) { print "<title>$safeConfig{'title'}</title>\n" }
        else                  { print "<title>Thank You</title>\n"        }

        print " </head>\n <body";

        # Get Body Tag Attributes                                            #
        &body_attributes;

        # Close Body Tag                                                     #
        print ">\n  <center>\n";

        # Print custom or generic title.                                     #
        if ($Config{'title'}) { print "<h1>$safeConfig{'title'}</h1>\n" }
        else { print "<h1>Thank You For Filling Out This Form</h1>\n" }

        print "</center>\n";

        print "Below is what you submitted to $safeConfig{'recipient'} on ";
        print "$date<p><hr size=1 width=75\%><p>\n";

        # If a sort order is specified, sort the form fields based on that.  #
        if ($Config{'sort'} =~ /^order:.*,.*/) {

            # Set the temporary $sort_order variable to the sorting order,   #
            # remove extraneous line breaks and spaces, remove the order:    #
            # directive and split the sort fields into an array.             #
            $sort_order = $Config{'sort'};
            $sort_order =~ s/(\s+|\n)?,(\s+|\n)?/,/g;
            $sort_order =~ s/(\s+)?\n+(\s+)?//g;
            $sort_order =~ s/order://;
            @sorted_fields = split(/,/, $sort_order);

            # For each sorted field, if it has a value or the print blank    #
            # fields option is turned on print the form field and value.     #
            foreach $sorted_field (@sorted_fields) {
                local $sfname = &clean_html($sorted_field);

                if ($Config{'print_blank_fields'} || $Form{$sorted_field} ne '') {
                    print "<b>$sfname:</b> $Form{$sorted_field}<p>\n";
                }
            }
        }

        # Otherwise, use the order the fields were sent, or alphabetic.      #
        else {

            # Sort alphabetically if requested.
            if ($Config{'sort'} eq 'alphabetic') {
                @Field_Order = sort @Field_Order;
            }

            # For each form field, if it has a value or the print blank      #
            # fields option is turned on print the form field and value.     #
            foreach $field (@Field_Order) {
                local $fname = &clean_html($field);

                if ($Config{'print_blank_fields'} || $Form{$field} ne '') {
                    print "<b>$fname:</b> $Form{$field}<p>\n";
                }
            }
        }

        print "<p><hr size=1 width=75%><p>\n";

        # Check for a Return Link and print one if found.                    #
        if ($Config{'return_link_url'} && $Config{'return_link_title'}) {
            print "<ul>\n";
            print "<li><a href=\"$safeConfig{'return_link_url'}\">$safeConfig{'return_link_title'}</a>\n";
            print "</ul>\n";
        }

        # Print the page footer.                                             #
        print <<"(END HTML FOOTER)";
        <hr size=1 width=75%><p>
        <center><font size=-1><a href="http://www.scriptarchive.com/formmail.html">FormMail</a> V1.92 & 1995 - 2002  Matt Wright<br>
A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive, Inc.</a></font></center>
        </body>
       </html>
(END HTML FOOTER)
    }
}

sub send_mail {
    # Localize variables used in this subroutine.                            #
    local($print_config,$key,$sort_order,$sorted_field,$env_report);

    # Open The Mail Program
    open(MAIL,"|$mailprog");

    print MAIL "To: $Config{'recipient'}\n";
    print MAIL "From: $Config{'email'} ($Config{'realname'})\n";

    # Check for Message Subject
    if ($Config{'subject'}) { print MAIL "Subject: $Config{'subject'}\n\n" }
    else                    { print MAIL "Subject: WWW Form Submission\n\n" }

    print MAIL "Below is the result of your feedback form.  It was submitted by\n";
    print MAIL "$Config{'realname'} ($Config{'email'}) on $date\n";
    print MAIL "-" x 75 . "\n\n";

    if (@Print_Config) {
        foreach $print_config (@Print_Config) {
            if ($Config{$print_config}) {
                print MAIL "$print_config: $Config{$print_config}\n\n";
            }
        }
    }

    # If a sort order is specified, sort the form fields based on that.      #
    if ($Config{'sort'} =~ /^order:.*,.*/) {

        # Remove extraneous line breaks and spaces, remove the order:        #
        # directive and split the sort fields into an array.                 #
        local $sort_order = $Config{'sort'};
        $sort_order =~ s/(\s+|\n)?,(\s+|\n)?/,/g;
        $sort_order =~ s/(\s+)?\n+(\s+)?//g;
        $sort_order =~ s/order://;
        @sorted_fields = split(/,/, $sort_order);

        # For each sorted field, if it has a value or the print blank        #
        # fields option is turned on print the form field and value.         #
        foreach $sorted_field (@sorted_fields) {
            if ($Config{'print_blank_fields'} || $Form{$sorted_field} ne '') {
                print MAIL "$sorted_field: $Form{$sorted_field}\n\n";
            }
        }
    }

    # Otherwise, print fields in order they were sent or alphabetically.     #
    else {

        # Sort alphabetically if specified:                                  #
        if ($Config{'sort'} eq 'alphabetic') {
            @Field_Order = sort @Field_Order;
        }

        # For each form field, if it has a value or the print blank          #
        # fields option is turned on print the form field and value.         #
        foreach $field (@Field_Order) {
            if ($Config{'print_blank_fields'} || $Form{$field} ne '') {
                print MAIL "$field: $Form{$field}\n\n";
            }
        }
    }

    print MAIL "-" x 75 . "\n\n";

    # Send any specified Environment Variables to recipient.                 #
    foreach $env_report (@Env_Report) {
        if ($ENV{$env_report}) {
            print MAIL "$env_report: $ENV{$env_report}\n";
        }
    }

    close (MAIL);
}

sub check_email {
    # Initialize local email variable with input to subroutine.              #
    $email = $_[0];

    # If the e-mail address contains:                                        #
    if ($email =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)/ ||

        # the e-mail address contains an invalid syntax.  Or, if the         #
        # syntax does not match the following regular expression pattern     #
        # it fails basic syntax verification.                                #

        $email !~ /^.+\@(\[?)[a-zA-Z0-9\-\.]+\.([a-zA-Z0-9]+)(\]?)$/) {

        # Basic syntax requires:  one or more characters before the @ sign,  #
        # followed by an optional '[', then any number of letters, numbers,  #
        # dashes or periods (valid domain/IP characters) ending in a period  #
        # and then 2 or 3 letters (for domain suffixes) or 1 to 3 numbers    #
        # (for IP addresses).  An ending bracket is also allowed as it is    #
        # valid syntax to have an email address like: user@[255.255.255.0]   #

        # Return a false value, since the e-mail address did not pass valid  #
        # syntax.                                                            #
        return 0;
    }

    else {

        # Return a true value, e-mail verification passed.                   #
        return 1;
    }
}

# This was added into v1.91 to further secure the recipients array.  Now, by #
# default it will assume that valid recipients include only users with       #
# usernames A-Z, a-z, 0-9, _ and - that match your domain exactly.  If this  #
# is not what you want, you should read more detailed instructions regarding #
# the configuration of the @recipients variable in the documentation.        #
sub fill_recipients {
    local(@domains) = @_;
    local($domain,@return_recips);

    foreach $domain (@domains) {
        if ($domain =~ /^\d+\.\d+\.\d+\.\d+$/) {
            $domain =~ s/\./\\\./g;
            push(@return_recips,'^[\w\-\.]+\@\[' . $domain . '\]');
        }
        else {
            $domain =~ s/\./\\\./g;
            $domain =~ s/\-/\\\-/g;
            push(@return_recips,'^[\w\-\.]+\@' . $domain);
        }
    }

    return @return_recips;
}

# This function will convert <, >, & and " to their HTML equivalents.        #
sub clean_html {
    local $value = $_[0];
    $value =~ s/\&/\&/g;
    $value =~ s/</\&/g;
    $value =~ s/>/\&/g;
    $value =~ s/"/\&/g;
    return $value;
}

sub body_attributes {
    # Check for Background Color
    if ($Config{'bgcolor'}) { print " bgcolor=\"$safeConfig{'bgcolor'}\"" }

    # Check for Background Image
    if ($Config{'background'}) { print " background=\"$safeConfig{'background'}\"" }

    # Check for Link Color
    if ($Config{'link_color'}) { print " link=\"$safeConfig{'link_color'}\"" }

    # Check for Visited Link Color
    if ($Config{'vlink_color'}) { print " vlink=\"$safeConfig{'vlink_color'}\"" }

    # Check for Active Link Color
    if ($Config{'alink_color'}) { print " alink=\"$safeConfig{'alink_color'}\"" }

    # Check for Body Text Color
    if ($Config{'text_color'}) { print " text=\"$safeConfig{'text_color'}\"" }
}

sub error {
    # Localize variables and assign subroutine input.                        #
    local($error,@error_fields) = @_;
    local($host,$missing_field,$missing_field_list);

    if ($error eq 'bad_referer') {
        if ($ENV{'HTTP_REFERER'} =~ m|^https?://([\w\.]+)|i) {
            $host = $1;
            my $referer = &clean_html($ENV{'HTTP_REFERER'});
            print <<"(END ERROR HTML)";
Content-type: text/html

<html>
 <head>
  <title>Bad Referrer - Access Denied</title>
 </head>
 <body bgcolor=#FFFFFF text=#000000>
  <center>
   <table border=0 width=600 bgcolor=#9C9C9C>
    <tr><th><font size=+2>Bad Referrer - Access Denied</font></th></tr>
   </table>
   <table border=0 width=600 bgcolor=#CFCFCF>
    <tr><td>The form attempting to use
     <a href="http://www.scriptarchive.com/formmail.html">FormMail</a>
     resides at <tt>$referer</tt>, which is not allowed to access
     this cgi script.<p>

     If you are attempting to configure FormMail to run with this form, you need
     to add the following to \@referers, explained in detail in the
     <a href="http://www.scriptarchive.com/readme/formmail.html">README</a> file.<p>

     Add <tt>'$host'</tt> to your <tt><b>\@referers</b></tt> array.<hr size=1>
     <center><font size=-1>
      <a href="http://www.scriptarchive.com/formmail.html">FormMail</a> V1.92 & 1995 - 2002  Matt Wright<br>
      A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive, Inc.</a>
     </font></center>
    </td></tr>
   </table>
  </center>
 </body>
</html>
(END ERROR HTML)
        }
        else {
            print <<"(END ERROR HTML)";
Content-type: text/html

<html>
 <head>
  <title>FormMail v1.92</title>
 </head>
 <body bgcolor=#FFFFFF text=#000000>
  <center>
   <table border=0 width=600 bgcolor=#9C9C9C>
    <tr><th><font size=+2>FormMail</font></th></tr>
   </table>
   <table border=0 width=600 bgcolor=#CFCFCF>
    <tr><th><tt><font size=+1>Copyright 1995 - 2002 Matt Wright<br>
        Version 1.92 - Released April 21, 2002<br>
        A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive,
        Inc.</a></font></tt></th></tr>
   </table>
  </center>
 </body>
</html>
(END ERROR HTML)
        }
    }

    elsif ($error eq 'request_method') {
            print <<"(END ERROR HTML)";
Content-type: text/html

<html>
 <head>
  <title>Error: Request Method</title>
 </head>
 <body bgcolor=#FFFFFF text=#000000>
  <center>
   <table border=0 width=600 bgcolor=#9C9C9C>
    <tr><th><font size=+2>Error: Request Method</font></th></tr>
   </table>
   <table border=0 width=600 bgcolor=#CFCFCF>
    <tr><td>The Request Method of the Form you submitted did not match
     either <tt>GET</tt> or <tt>POST</tt>.  Please check the form and make sure the
     <tt>method=</tt> statement is in upper case and matches <tt>GET</tt> or <tt>POST</tt>.<p>

     <center><font size=-1>
      <a href="http://www.scriptarchive.com/formmail.html">FormMail</a> V1.92 & 1995 - 2002  Matt Wright<br>
      A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive, Inc.</a>
     </font></center>
    </td></tr>
   </table>
  </center>
 </body>
</html>
(END ERROR HTML)
    }

    elsif ($error eq 'no_recipient') {
            print <<"(END ERROR HTML)";
Content-type: text/html

<html>
 <head>
  <title>Error: Bad/No Recipient</title>
 </head>
 <body bgcolor=#FFFFFF text=#000000>
  <center>
   <table border=0 width=600 bgcolor=#9C9C9C>
    <tr><th><font size=+2>Error: Bad/No Recipient</font></th></tr>
   </table>
   <table border=0 width=600 bgcolor=#CFCFCF>
    <tr><td>There was no recipient or an invalid recipient specified in the data sent to FormMail.  Please
     make sure you have filled in the <tt>recipient</tt> form field with an e-mail
     address that has been configured in <tt>\@recipients</tt>.  More information on filling in <tt>recipient</tt> form fields and variables can be
     found in the <a href="http://www.scriptarchive.com/readme/formmail.html">README</a> file.<hr size=1>

     <center><font size=-1>
      <a href="http://www.scriptarchive.com/formmail.html">FormMail</a> V1.92 & 1995 - 2002  Matt Wright<br>
      A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive, Inc.</a>
     </font></center>
    </td></tr>
   </table>
  </center>
 </body>
</html>
(END ERROR HTML)
    }

    elsif ($error eq 'invalid_headers') {
            print <<"(END ERROR HTML)";
Content-type: text/html

<html>
 <head>
  <title>Error: Bad Header Fields</title>
 </head>
 <body bgcolor=#FFFFFF text=#000000>
  <center>
   <table border=0 width=600 bgcolor=#9C9C9C>
    <tr><th><font size=+2>Error: Bad Header Fields</font></th></tr>
   </table>
   <table border=0 width=600 bgcolor=#CFCFCF>
    <tr><td>The header fields, which include <tt>recipient</tt>, <tt>email</tt>, <tt>realname</tt> and <tt>subject</tt> were
     filled in with invalid values. You may not include any newline characters in these parameters.
     More information on filling in these form fields and variables can be
     found in the <a href="http://www.scriptarchive.com/readme/formmail.html">README</a> file.<hr size=1>

     <center><font size=-1>
      <a href="http://www.scriptarchive.com/formmail.html">FormMail</a> V1.92 & 1995 - 2002  Matt Wright<br>
      A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive, Inc.</a>
     </font></center>
    </td></tr>
   </table>
  </center>
 </body>
</html>
(END ERROR HTML)
    }

    elsif ($error eq 'missing_fields') {
        if ($Config{'missing_fields_redirect'}) {
            print "Location: " . &clean_html($Config{'missing_fields_redirect'}) . "\n\n";
        }
        else {
            foreach $missing_field (@error_fields) {
                $missing_field_list .= "<li>" . &clean_html($missing_field) . "\n";
            }

            print <<"(END ERROR HTML)";
Content-type: text/html

<html>
 <head>
  <title>Error: Blank Fields</title>
 </head>
  <center>
   <table border=0 width=600 bgcolor=#9C9C9C>
    <tr><th><font size=+2>Error: Blank Fields</font></th></tr>
   </table>
   <table border=0 width=600 bgcolor=#CFCFCF>
    <tr><td>The following fields were left blank in your submission form:<p>
     <ul>
$missing_field_list
     </ul><br>

     These fields must be filled in before you can successfully submit the form.<p>
     Please use your browser's back button to return to the form and try again.<hr size=1>
     <center><font size=-1>
      <a href="http://www.scriptarchive.com/formmail.html">FormMail</a> V1.92 & 1995 - 2002  Matt Wright<br>
      A Free Product of <a href="http://www.scriptarchive.com/">Matt's Script Archive, Inc.</a>
     </font></center>
    </td></tr>
   </table>
  </center>
 </body>
</html>
(END ERROR HTML)
        }
    }

    exit;
}
::: Guldstrand :::

That i donīt allready know, i really want to learn...

Offline steve

  • Galactic Royalty
  • *****
  • Posts: 207
Formmail!!?
« Reply #42 on: November 21, 2003, 09:49:14 AM »
Quote from: Guldstrand
I have downloaded a cgi-script from Matt's Script Archive, but i canīt get it to work.   :?

I came to the thank you page, but i havenīt recieved any mails yet from my forms.  :shock:
Can someone please check the code and help me!?  :oops:

I know they disabled the use of "formmail.pl" on the servers, but if you rename the script to fmail.pl or something similar it should circumvent the restriction.

What error are you getting?
Steven Klassen
Lunarpages Support
http://www.lunarpages.com/

leighsww

  • Guest
Formmail!!?
« Reply #43 on: November 21, 2003, 09:50:51 AM »
I can't help you with Matt's script.  I can only help you with the one I use (bnbform.cgi) since I am only familiar with it.

I was thinking that this morning I would try filling out the form on your server/website to see if I got the same error message as you with the bnbform.cgi.

Here's what's true ...

1) I was able to process your form on my server - so the fact is that the form and script works fine (you received the two e-mails from my filling out the form)
2) You said you uploaded in ASCII and chmod to 755 (I can't verify that on my end, so I will trust that you did that correctly.)
3) You said you changed the script name to "bnbform.cgi" (again, I can't verify that, but I will take your word.)

So, the only conclusion is that if it isn't working for you, it may have to do with your computer setting - like having too high a security set in your browser or something.  Sometimes forms get the "Can't run from here" when some security setting is too high.

Anyway, I was going to try to fill out the form on your server today to see if it may indeed work, thus knowing for sure if it's just your computer.  Oh well.

Good luck.  Hopefully, someone else can help you.

leighsww

  • Guest
Formmail!!?
« Reply #44 on: November 21, 2003, 10:14:45 AM »
P.S. Regarding Matt's script ...

Try adding your domains with the www, also to the referers line.  Example:

@referers = ('webb.guldstrands.net','guldstrands.net','www.guldstrands.net','www.webb.guldstrands.net');

I don't know if that will do it, but my last shot to try to help you at least  :wink: